Today, the bucket shaft manufacturer will talk about engine oil. Excavator owners often encounter situations where the oil level is low. In such urgent situations, some owners will use engine oil. At this point, you might have a question: "Aren't we all using diesel? Can engine oils be mixed?" The bucket shaft manufacturer tells you that it is possible. Next, we'll share information about mixing engine oils.
Most people generally buy used engines, although some buy new ones. Whether new or used, their maintenance is the same; there's no difference in treatment. Both use engine oil for lubrication. The manufacturer of bucket shafts strongly advises everyone to pay attention to this. Because engine oil changes and lubrication are crucial, and the replacement interval is only 500 hours, owners often wonder if they can mix different types of oil. Will mixing them cause other problems?
We all know that there are many types of engine oil on the market, with various brands and grades. Which one is suitable for emergency use? The manufacturer reminds everyone: regardless of whether the engine oil is new or used, if the brand and grade are different, they should not be mixed. Therefore, the manufacturer will now discuss which engine oils can be mixed in an emergency.
Essential Condition 1: Ensure Products are of the Same Type
In emergency situations during construction where normal maintenance is impossible, engine oil can be used as a temporary measure. However, it is crucial to ensure that the oils used are of the same type. The bucket shaft manufacturer also reminds everyone that mixing oils is only permitted in emergencies if the machine's engine requires diesel fuel and all brands and qualities are similar. Furthermore, summer and winter oils should not be mixed.
Essential Condition 2: Adjusting Viscosity to the Same Level is Optimal
Most experienced machine owners can observe engine oil viscosity and adjust it accordingly. Mixing different grades of the same brand of oil is possible. However, the bucket shaft manufacturer cautions that this method should only be used in dire situations and should not be used long-term, as it can damage the machine to varying degrees.
Essential Condition Three: Additives in Engine Oil Must Not Cause Chemical Reactions
Most people have some understanding of engine oil and diesel oil. Both types of oil contain additives, and different oils have different additives. Mixing them can cause chemical reactions that can prevent the engine from running properly or even damage it. Because of these additives, manufacturers generally advise against mixing oils unless absolutely necessary, and even then, only in extremely difficult situations. The key condition is to prevent chemical reactions between the two oils. This means the two oils purchased should have the same additives, or at least one of them should be additive-free, but only for emergency use.
Essential Condition Four: Fully Synthetic Oils Should Be Mixed with Caution
Fully synthetic oils are also a type of engine oil. Manufacturers warn against mixing them, as the consequences can be dire. Owners might then wonder, if fully synthetic oils are unsuitable, can semi-synthetic oils be used? Bucket shaft manufacturers tell you: Mixing different types of engine oil is possible, and semi-synthetic oil is a favorite among machine owners. This is because diesel fuel, when mixed with mineral oil, has minimal impact on engine damage.
Based on the above conditions, machine owners might hesitate, as these conditions are indeed quite stringent. They know it's difficult to meet these conditions during on-site operations, and the entire process demands a high level of experience from the operator. Therefore, very few people can meet these requirements. This is a unique characteristic of the construction machinery industry, where maintenance and repair are extremely rigorous and cannot be taken lightly.
While the conditions are indeed strict and pose a significant challenge for machine owners, bucket shaft manufacturers offer a simple and easy-to-understand tip regarding mixing engine oils. This allows for low-cost operation and excellent results. Of course, this method is only for emergency use. Under normal circumstances, you should not use it. You can try the following trick: First, mix the two types of engine oil in a 1:1 ratio and stir well. Be sure to place it in a cool, dry place without flying sand and observe it. As long as there is no abnormality such as odor, separation, or sedimentation, it means that the two types of engine oil can be mixed.
The information shared in this article can indeed help you with emergency situations under some harsh conditions. However, the bucket shaft manufacturer would like to remind everyone that all the emergency conditions and tests mentioned above are only for emergency use. If possible, it is still advisable to replace the parts with new ones promptly to protect the engine's longevity.
[Kangnai Bucket Shaft Manufacturer] Some information is sourced from the internet. We strive for safety, timeliness, and accuracy to convey more information and do not necessarily endorse its views or guarantee its authenticity. If any information reprinted on this website involves copyright issues, please contact us promptly for deletion.
